spacer
spacer
Services spacer Gallery & Video spacer Links spacer Latest News spacer Environment spacer Clients spacer Contact Us spacer Home
spacer
spacer
spacer
Services: Hardfoam Services
spacer

AWARD WINNING TRY-LINE TANK LINING SYSTEM
CERTIFIED TO EN13160-7
UK Patent Nos. GB 2 474 038 B & GB 2 474 096B

TANKS INSPECTED, BLASTED, PROTECTIVE COATED, HAND CHOP MAT COATED PATENTED INTERSTITIAL TRYLINE SHEETING, TOP COATED WHICH IS ACTUAL EIGHT LAYER SYSTEM WITH A FUME SILICA GLASS TOP COAT

100% of tank interstitial monitored Class 1 or 2 leak detection.  Complete work carried out by in house trained staff using company owned vehicles to carry out uplifts and cleaning including tankers and mobile fitters, support vehicles with coded welders.  Minimum tank entry while tanks are being gas freed using Pet track.  All materials guaranteed resistant to current petroleum products up to and including E85 with built in protection against static electricity.  Cable failure and lining leak detection fully unique. Interstitial space access for liquid type and vapour testing.

Included free first 12 months monitor operating test.

Existing tank inspection by independent tank inspector to issue guarantee tank lifetime.  Excellent back up service and information as required with emergency call out facility to existing customers.

Capable of working to tight 4 week full site programmes a typical site of 200,000 to 240,000 litres.

Optional extras:-

Self clean tank ports x 4 located at ¼ intervals or bespoke
Dip striker plate extra re-enforced
Atlas chamber fitting or customer requirements
Pipe prep and replacement/cover replacements
Interceptor repairs with double lining and added monitoring

On site testing observed and endorsed by London Fire Brigade.

TUV Nord certified by Jurgen Straube (on the committee who wrote European 13160 standard)

MONITORING SYSTEM 

These units are a vacuum sensitive system that will pick up on a drop in pressure, and will in turn determine a hole in the tank.  It is also capable of picking up on a fault in the cable, whether shorted out, cut or damaged, using a ps81 gem sensor that works on a normally open/closed circuit.

All unit’s and power supplies used within the alarm unit are C.E approved and marked, with an industry standard pressure switch.

 

The pressure switch is designed and manufactured in accordance with sound engineering practice as defined by the pressure equipment directive 97/23/EC.

The alarm unit will only display the blue POWER light when in normal working state.

The alarm unit has two alarm fault codes as follows:-

Low pressure fault (e.g. leak interstitial) = audible sounder and RED ALARM fault light.

Cable fault = RED CABLE BREAK fault light only

To reset the system press the MUTE/reset button the alarm will silence but alarm lights will stay on until fault/faults are cleared.

Additionally your monitoring system is installed with a Zener Barrier.

 

 

 

 

 

 

Intrinsic safety (IS) is a protection technique for safe operation of electronic equipment in explosive atmospheres and under irregular operating conditions. The theory behind intrinsic safety is to ensure that the available electrical and thermal energy in the system is always low enough that ignition of the hazardous atmosphere cannot occur. This is achieved by ensuring that only low voltages and currents enter the hazardous area, and that all electric supply and signal wires are protected by Zener safety barriers.

In the event of the audible alarm sounding and a fault light showing you must take the following action;

Organization Chart

Summary

Subject

Standard

Remarks

Quality

BS EN ISO 9001:2008

Certificate No. GB8349

Environment

BS EN ISO 14001:1996

Certificate No. GB11466

Health & Safety

BS OHSAS 18001:2007

Certificate No. GB18968

Accreditations

Safe Contractor

Membership No. R12388

 

UVBD Achilles

Supplier No. 702857

Industry Memberships

APEA

Corporate Member

 

PEIMF

Corporate Member

 

TSA

Approved Supplier

Awards

APEA Environment

Winners 2011 - 2012

In addition to the above all our engineers are fully trained, health screened (including Drug/Alcohol testing) and as a minimum hold appropriate CSCS, CPCS, and SPA UKPIA.

Tanks & Pipeworks Ltd is an accredited Training Provider of the SPA UKPIA and our HSSE/Compliance Manager sits as a member on the Petrol Working Party.

 
Glassfibre Lining Process Complete
More Photographs>>   View PDF Brochure>>
spacer spacer
footer
spacer
Services  |  Gallery & Video  |  Links  |  Latest News  |  Environment  |  Clients  |  Contact Us  |  Home | Terms & Conditions

       Site Design And Content Copyright 2011 Tanks and Pipeworks Limited Company Registration Number 04040268 |   | Rear of Kings Lodge, London Road, West Kingsdown, TN15 6AR Telephone: 01474 855587 | info@fassuk.com |  WebDesign, Maintenance & Management By Xenon